root/applications/bdmtoolbox/Doxyfile @ 1389

Revision 1047, 64.5 kB (checked in by smidl, 14 years ago)

doxy

Line 
1# Doxyfile 1.6.3
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME           = bdmtoolbox
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER         = $VERSION$
35
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY       = doc/
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS         = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62
63OUTPUT_LANGUAGE        = English
64
65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66# include brief member descriptions after the members that are listed in
67# the file and class documentation (similar to JavaDoc).
68# Set to NO to disable this.
69
70BRIEF_MEMBER_DESC      = YES
71
72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73# the brief description of a member or function before the detailed description.
74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75# brief descriptions will be completely suppressed.
76
77REPEAT_BRIEF           = YES
78
79# This tag implements a quasi-intelligent brief description abbreviator
80# that is used to form the text in various listings. Each string
81# in this list, if found as the leading text of the brief description, will be
82# stripped from the text and the result after processing the whole list, is
83# used as the annotated text. Otherwise, the brief description is used as-is.
84# If left blank, the following values are used ("$name" is automatically
85# replaced with the name of the entity): "The $name class" "The $name widget"
86# "The $name file" "is" "provides" "specifies" "contains"
87# "represents" "a" "an" "the"
88
89ABBREVIATE_BRIEF       = "The $name class" \
90                         "The $name widget" \
91                         "The $name file" \
92                         is \
93                         provides \
94                         specifies \
95                         contains \
96                         represents \
97                         a \
98                         an \
99                         the
100
101# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
102# Doxygen will generate a detailed section even if there is only a brief
103# description.
104
105ALWAYS_DETAILED_SEC    = NO
106
107# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
108# inherited members of a class in the documentation of that class as if those
109# members were ordinary class members. Constructors, destructors and assignment
110# operators of the base classes will not be shown.
111
112INLINE_INHERITED_MEMB  = YES
113
114# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
115# path before files name in the file list and in the header files. If set
116# to NO the shortest path that makes the file name unique will be used.
117
118FULL_PATH_NAMES        = NO
119
120# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
121# can be used to strip a user-defined part of the path. Stripping is
122# only done if one of the specified strings matches the left-hand part of
123# the path. The tag can be used to show relative paths in the file list.
124# If left blank the directory from which doxygen is run is used as the
125# path to strip.
126
127STRIP_FROM_PATH        = /home/smidl/work/git/mixpp
128
129# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
130# the path mentioned in the documentation of a class, which tells
131# the reader which header file to include in order to use a class.
132# If left blank only the name of the header file containing the class
133# definition is used. Otherwise one should specify the include paths that
134# are normally passed to the compiler using the -I flag.
135
136STRIP_FROM_INC_PATH    =
137
138# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
139# (but less readable) file names. This can be useful is your file systems
140# doesn't support long names like on DOS, Mac, or CD-ROM.
141
142SHORT_NAMES            = NO
143
144# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
145# will interpret the first line (until the first dot) of a JavaDoc-style
146# comment as the brief description. If set to NO, the JavaDoc
147# comments will behave just like regular Qt-style comments
148# (thus requiring an explicit @brief command for a brief description.)
149
150JAVADOC_AUTOBRIEF      = NO
151
152# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
153# interpret the first line (until the first dot) of a Qt-style
154# comment as the brief description. If set to NO, the comments
155# will behave just like regular Qt-style comments (thus requiring
156# an explicit \brief command for a brief description.)
157
158QT_AUTOBRIEF           = NO
159
160# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
161# treat a multi-line C++ special comment block (i.e. a block of //! or ///
162# comments) as a brief description. This used to be the default behaviour.
163# The new default is to treat a multi-line C++ comment block as a detailed
164# description. Set this tag to YES if you prefer the old behaviour instead.
165
166MULTILINE_CPP_IS_BRIEF = NO
167
168# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
169# member inherits the documentation from any documented member that it
170# re-implements.
171
172INHERIT_DOCS           = YES
173
174# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
175# a new page for each member. If set to NO, the documentation of a member will
176# be part of the file/class/namespace that contains it.
177
178SEPARATE_MEMBER_PAGES  = NO
179
180# The TAB_SIZE tag can be used to set the number of spaces in a tab.
181# Doxygen uses this value to replace tabs by spaces in code fragments.
182
183TAB_SIZE               = 8
184
185# This tag can be used to specify a number of aliases that acts
186# as commands in the documentation. An alias has the form "name=value".
187# For example adding "sideeffect=\par Side Effects:\n" will allow you to
188# put the command \sideeffect (or @sideeffect) in the documentation, which
189# will result in a user-defined paragraph with heading "Side Effects:".
190# You can put \n's in the value part of an alias to insert newlines.
191
192ALIASES                =
193
194# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
195# sources only. Doxygen will then generate output that is more tailored for C.
196# For instance, some of the names that are used will be different. The list
197# of all members will be omitted, etc.
198
199OPTIMIZE_OUTPUT_FOR_C  = NO
200
201# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
202# sources only. Doxygen will then generate output that is more tailored for
203# Java. For instance, namespaces will be presented as packages, qualified
204# scopes will look different, etc.
205
206OPTIMIZE_OUTPUT_JAVA   = NO
207
208# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
209# sources only. Doxygen will then generate output that is more tailored for
210# Fortran.
211
212OPTIMIZE_FOR_FORTRAN   = NO
213
214# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
215# sources. Doxygen will then generate output that is tailored for
216# VHDL.
217
218OPTIMIZE_OUTPUT_VHDL   = NO
219
220# Doxygen selects the parser to use depending on the extension of the files it parses.
221# With this tag you can assign which parser to use for a given extension.
222# Doxygen has a built-in mapping, but you can override or extend it using this tag.
223# The format is ext=language, where ext is a file extension, and language is one of
224# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
225# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
226# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
227# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
228
229EXTENSION_MAPPING      = m=C++
230
231# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
232# to include (a tag file for) the STL sources as input, then you should
233# set this tag to YES in order to let doxygen match functions declarations and
234# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
235# func(std::string) {}). This also make the inheritance and collaboration
236# diagrams that involve STL classes more complete and accurate.
237
238BUILTIN_STL_SUPPORT    = NO
239
240# If you use Microsoft's C++/CLI language, you should set this option to YES to
241# enable parsing support.
242
243CPP_CLI_SUPPORT        = NO
244
245# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
246# Doxygen will parse them like normal C++ but will assume all classes use public
247# instead of private inheritance when no explicit protection keyword is present.
248
249SIP_SUPPORT            = NO
250
251# For Microsoft's IDL there are propget and propput attributes to indicate getter
252# and setter methods for a property. Setting this option to YES (the default)
253# will make doxygen to replace the get and set methods by a property in the
254# documentation. This will only work if the methods are indeed getting or
255# setting a simple type. If this is not the case, or you want to show the
256# methods anyway, you should set this option to NO.
257
258IDL_PROPERTY_SUPPORT   = YES
259
260# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
261# tag is set to YES, then doxygen will reuse the documentation of the first
262# member in the group (if any) for the other members of the group. By default
263# all members of a group must be documented explicitly.
264
265DISTRIBUTE_GROUP_DOC   = NO
266
267# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
268# the same type (for instance a group of public functions) to be put as a
269# subgroup of that type (e.g. under the Public Functions section). Set it to
270# NO to prevent subgrouping. Alternatively, this can be done per class using
271# the \nosubgrouping command.
272
273SUBGROUPING            = YES
274
275# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
276# is documented as struct, union, or enum with the name of the typedef. So
277# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
278# with name TypeT. When disabled the typedef will appear as a member of a file,
279# namespace, or class. And the struct will be named TypeS. This can typically
280# be useful for C code in case the coding convention dictates that all compound
281# types are typedef'ed and only the typedef is referenced, never the tag name.
282
283TYPEDEF_HIDES_STRUCT   = NO
284
285# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
286# determine which symbols to keep in memory and which to flush to disk.
287# When the cache is full, less often used symbols will be written to disk.
288# For small to medium size projects (<1000 input files) the default value is
289# probably good enough. For larger projects a too small cache size can cause
290# doxygen to be busy swapping symbols to and from disk most of the time
291# causing a significant performance penality.
292# If the system has enough physical memory increasing the cache will improve the
293# performance by keeping more symbols in memory. Note that the value works on
294# a logarithmic scale so increasing the size by one will rougly double the
295# memory usage. The cache size is given by this formula:
296# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
297# corresponding to a cache size of 2^16 = 65536 symbols
298
299SYMBOL_CACHE_SIZE      = 0
300
301#---------------------------------------------------------------------------
302# Build related configuration options
303#---------------------------------------------------------------------------
304
305# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
306# documentation are documented, even if no documentation was available.
307# Private class members and static file members will be hidden unless
308# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
309
310EXTRACT_ALL            = NO
311
312# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
313# will be included in the documentation.
314
315EXTRACT_PRIVATE        = NO
316
317# If the EXTRACT_STATIC tag is set to YES all static members of a file
318# will be included in the documentation.
319
320EXTRACT_STATIC         = NO
321
322# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
323# defined locally in source files will be included in the documentation.
324# If set to NO only classes defined in header files are included.
325
326EXTRACT_LOCAL_CLASSES  = YES
327
328# This flag is only useful for Objective-C code. When set to YES local
329# methods, which are defined in the implementation section but not in
330# the interface are included in the documentation.
331# If set to NO (the default) only methods in the interface are included.
332
333EXTRACT_LOCAL_METHODS  = NO
334
335# If this flag is set to YES, the members of anonymous namespaces will be
336# extracted and appear in the documentation as a namespace called
337# 'anonymous_namespace{file}', where file will be replaced with the base
338# name of the file that contains the anonymous namespace. By default
339# anonymous namespace are hidden.
340
341EXTRACT_ANON_NSPACES   = NO
342
343# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
344# undocumented members of documented classes, files or namespaces.
345# If set to NO (the default) these members will be included in the
346# various overviews, but no documentation section is generated.
347# This option has no effect if EXTRACT_ALL is enabled.
348
349HIDE_UNDOC_MEMBERS     = NO
350
351# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
352# undocumented classes that are normally visible in the class hierarchy.
353# If set to NO (the default) these classes will be included in the various
354# overviews. This option has no effect if EXTRACT_ALL is enabled.
355
356HIDE_UNDOC_CLASSES     = NO
357
358# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
359# friend (class|struct|union) declarations.
360# If set to NO (the default) these declarations will be included in the
361# documentation.
362
363HIDE_FRIEND_COMPOUNDS  = NO
364
365# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
366# documentation blocks found inside the body of a function.
367# If set to NO (the default) these blocks will be appended to the
368# function's detailed documentation block.
369
370HIDE_IN_BODY_DOCS      = NO
371
372# The INTERNAL_DOCS tag determines if documentation
373# that is typed after a \internal command is included. If the tag is set
374# to NO (the default) then the documentation will be excluded.
375# Set it to YES to include the internal documentation.
376
377INTERNAL_DOCS          = NO
378
379# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
380# file names in lower-case letters. If set to YES upper-case letters are also
381# allowed. This is useful if you have classes or files whose names only differ
382# in case and if your file system supports case sensitive file names. Windows
383# and Mac users are advised to set this option to NO.
384
385CASE_SENSE_NAMES       = YES
386
387# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
388# will show members with their full class and namespace scopes in the
389# documentation. If set to YES the scope will be hidden.
390
391HIDE_SCOPE_NAMES       = NO
392
393# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
394# will put a list of the files that are included by a file in the documentation
395# of that file.
396
397SHOW_INCLUDE_FILES     = YES
398
399# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
400# will list include files with double quotes in the documentation
401# rather than with sharp brackets.
402
403FORCE_LOCAL_INCLUDES   = NO
404
405# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
406# is inserted in the documentation for inline members.
407
408INLINE_INFO            = YES
409
410# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
411# will sort the (detailed) documentation of file and class members
412# alphabetically by member name. If set to NO the members will appear in
413# declaration order.
414
415SORT_MEMBER_DOCS       = YES
416
417# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
418# brief documentation of file, namespace and class members alphabetically
419# by member name. If set to NO (the default) the members will appear in
420# declaration order.
421
422SORT_BRIEF_DOCS        = NO
423
424# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
425
426SORT_MEMBERS_CTORS_1ST = NO
427
428# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
429# hierarchy of group names into alphabetical order. If set to NO (the default)
430# the group names will appear in their defined order.
431
432SORT_GROUP_NAMES       = NO
433
434# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
435# sorted by fully-qualified names, including namespaces. If set to
436# NO (the default), the class list will be sorted only by class name,
437# not including the namespace part.
438# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
439# Note: This option applies only to the class list, not to the
440# alphabetical list.
441
442SORT_BY_SCOPE_NAME     = NO
443
444# The GENERATE_TODOLIST tag can be used to enable (YES) or
445# disable (NO) the todo list. This list is created by putting \todo
446# commands in the documentation.
447
448GENERATE_TODOLIST      = YES
449
450# The GENERATE_TESTLIST tag can be used to enable (YES) or
451# disable (NO) the test list. This list is created by putting \test
452# commands in the documentation.
453
454GENERATE_TESTLIST      = YES
455
456# The GENERATE_BUGLIST tag can be used to enable (YES) or
457# disable (NO) the bug list. This list is created by putting \bug
458# commands in the documentation.
459
460GENERATE_BUGLIST       = YES
461
462# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
463# disable (NO) the deprecated list. This list is created by putting
464# \deprecated commands in the documentation.
465
466GENERATE_DEPRECATEDLIST= YES
467
468# The ENABLED_SECTIONS tag can be used to enable conditional
469# documentation sections, marked by \if sectionname ... \endif.
470
471ENABLED_SECTIONS       =
472
473# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
474# the initial value of a variable or define consists of for it to appear in
475# the documentation. If the initializer consists of more lines than specified
476# here it will be hidden. Use a value of 0 to hide initializers completely.
477# The appearance of the initializer of individual variables and defines in the
478# documentation can be controlled using \showinitializer or \hideinitializer
479# command in the documentation regardless of this setting.
480
481MAX_INITIALIZER_LINES  = 30
482
483# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
484# at the bottom of the documentation of classes and structs. If set to YES the
485# list will mention the files that were used to generate the documentation.
486
487SHOW_USED_FILES        = YES
488
489# If the sources in your project are distributed over multiple directories
490# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
491# in the documentation. The default is NO.
492
493SHOW_DIRECTORIES       = NO
494
495# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
496# This will remove the Files entry from the Quick Index and from the
497# Folder Tree View (if specified). The default is YES.
498
499SHOW_FILES             = YES
500
501# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
502# Namespaces page.
503# This will remove the Namespaces entry from the Quick Index
504# and from the Folder Tree View (if specified). The default is YES.
505
506SHOW_NAMESPACES        = NO
507
508# The FILE_VERSION_FILTER tag can be used to specify a program or script that
509# doxygen should invoke to get the current version for each file (typically from
510# the version control system). Doxygen will invoke the program by executing (via
511# popen()) the command <command> <input-file>, where <command> is the value of
512# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
513# provided by doxygen. Whatever the program writes to standard output
514# is used as the file version. See the manual for examples.
515
516FILE_VERSION_FILTER    =
517
518# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
519# doxygen. The layout file controls the global structure of the generated output files
520# in an output format independent way. The create the layout file that represents
521# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
522# file name after the option, if omitted DoxygenLayout.xml will be used as the name
523# of the layout file.
524
525LAYOUT_FILE            =
526
527#---------------------------------------------------------------------------
528# configuration options related to warning and progress messages
529#---------------------------------------------------------------------------
530
531# The QUIET tag can be used to turn on/off the messages that are generated
532# by doxygen. Possible values are YES and NO. If left blank NO is used.
533
534QUIET                  = NO
535
536# The WARNINGS tag can be used to turn on/off the warning messages that are
537# generated by doxygen. Possible values are YES and NO. If left blank
538# NO is used.
539
540WARNINGS               = YES
541
542# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
543# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
544# automatically be disabled.
545
546WARN_IF_UNDOCUMENTED   = YES
547
548# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
549# potential errors in the documentation, such as not documenting some
550# parameters in a documented function, or documenting parameters that
551# don't exist or using markup commands wrongly.
552
553WARN_IF_DOC_ERROR      = YES
554
555# This WARN_NO_PARAMDOC option can be abled to get warnings for
556# functions that are documented, but have no documentation for their parameters
557# or return value. If set to NO (the default) doxygen will only warn about
558# wrong or incomplete parameter documentation, but not about the absence of
559# documentation.
560
561WARN_NO_PARAMDOC       = NO
562
563# The WARN_FORMAT tag determines the format of the warning messages that
564# doxygen can produce. The string should contain the $file, $line, and $text
565# tags, which will be replaced by the file and line number from which the
566# warning originated and the warning text. Optionally the format may contain
567# $version, which will be replaced by the version of the file (if it could
568# be obtained via FILE_VERSION_FILTER)
569
570WARN_FORMAT            = "$file:$line: $text"
571
572# The WARN_LOGFILE tag can be used to specify a file to which warning
573# and error messages should be written. If left blank the output is written
574# to stderr.
575
576WARN_LOGFILE           =
577
578#---------------------------------------------------------------------------
579# configuration options related to the input files
580#---------------------------------------------------------------------------
581
582# The INPUT tag can be used to specify the files and/or directories that contain
583# documented source files. You may enter file names like "myfile.cpp" or
584# directories like "/usr/src/myproject". Separate the files or directories
585# with spaces.
586
587INPUT                  = .
588
589# This tag can be used to specify the character encoding of the source files
590# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
591# also the default input encoding. Doxygen uses libiconv (or the iconv built
592# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
593# the list of possible encodings.
594
595INPUT_ENCODING         = UTF-8
596
597# If the value of the INPUT tag contains directories, you can use the
598# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
599# and *.h) to filter out the source-files in the directories. If left
600# blank the following patterns are tested:
601# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
602# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
603
604# VS: EXCLUDE *.h
605FILE_PATTERNS          = *.c \
606                         *.cc \
607                         *.cpp \
608                         *.m \
609                         *.dox \
610                         *.dox
611
612# The RECURSIVE tag can be used to turn specify whether or not subdirectories
613# should be searched for input files as well. Possible values are YES and NO.
614# If left blank NO is used.
615
616RECURSIVE              = yes
617
618# The EXCLUDE tag can be used to specify files and/or directories that should
619# excluded from the INPUT source files. This way you can easily exclude a
620# subdirectory from a directory tree whose root is specified with the INPUT tag.
621
622EXCLUDE                =
623
624# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
625# directories that are symbolic links (a Unix filesystem feature) are excluded
626# from the input.
627
628EXCLUDE_SYMLINKS       = NO
629
630# If the value of the INPUT tag contains directories, you can use the
631# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
632# certain files from those directories. Note that the wildcards are matched
633# against the file with absolute path, so to exclude all test directories
634# for example use the pattern */test/*
635
636EXCLUDE_PATTERNS       =
637
638# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
639# (namespaces, classes, functions, etc.) that should be excluded from the
640# output. The symbol name can be a fully qualified name, a word, or if the
641# wildcard * is used, a substring. Examples: ANamespace, AClass,
642# AClass::ANamespace, ANamespace::*Test
643
644EXCLUDE_SYMBOLS        =
645
646# The EXAMPLE_PATH tag can be used to specify one or more files or
647# directories that contain example code fragments that are included (see
648# the \include command).
649
650EXAMPLE_PATH           =
651
652# If the value of the EXAMPLE_PATH tag contains directories, you can use the
653# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
654# and *.h) to filter out the source-files in the directories. If left
655# blank all files are included.
656
657EXAMPLE_PATTERNS       = *
658
659# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
660# searched for input files to be used with the \include or \dontinclude
661# commands irrespective of the value of the RECURSIVE tag.
662# Possible values are YES and NO. If left blank NO is used.
663
664EXAMPLE_RECURSIVE      = NO
665
666# The IMAGE_PATH tag can be used to specify one or more files or
667# directories that contain image that are included in the documentation (see
668# the \image command).
669
670IMAGE_PATH             =
671
672# The INPUT_FILTER tag can be used to specify a program that doxygen should
673# invoke to filter for each input file. Doxygen will invoke the filter program
674# by executing (via popen()) the command <filter> <input-file>, where <filter>
675# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
676# input file. Doxygen will then use the output that the filter program writes
677# to standard output.
678# If FILTER_PATTERNS is specified, this tag will be
679# ignored.
680
681INPUT_FILTER           =
682
683# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
684# basis.
685# Doxygen will compare the file name with each pattern and apply the
686# filter if there is a match.
687# The filters are a list of the form:
688# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
689# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
690# is applied to all files.
691
692FILTER_PATTERNS        = *.m=doc/m2cpp.pl
693
694# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
695# INPUT_FILTER) will be used to filter the input files when producing source
696# files to browse (i.e. when SOURCE_BROWSER is set to YES).
697
698FILTER_SOURCE_FILES    = NO
699
700#---------------------------------------------------------------------------
701# configuration options related to source browsing
702#---------------------------------------------------------------------------
703
704# If the SOURCE_BROWSER tag is set to YES then a list of source files will
705# be generated. Documented entities will be cross-referenced with these sources.
706# Note: To get rid of all source code in the generated output, make sure also
707# VERBATIM_HEADERS is set to NO.
708
709SOURCE_BROWSER         = NO
710
711# Setting the INLINE_SOURCES tag to YES will include the body
712# of functions and classes directly in the documentation.
713
714INLINE_SOURCES         = NO
715
716# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
717# doxygen to hide any special comment blocks from generated source code
718# fragments. Normal C and C++ comments will always remain visible.
719
720STRIP_CODE_COMMENTS    = YES
721
722# If the REFERENCED_BY_RELATION tag is set to YES
723# then for each documented function all documented
724# functions referencing it will be listed.
725
726REFERENCED_BY_RELATION = YES
727
728# If the REFERENCES_RELATION tag is set to YES
729# then for each documented function all documented entities
730# called/used by that function will be listed.
731
732REFERENCES_RELATION    = YES
733
734# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
735# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
736# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
737# link to the source code.
738# Otherwise they will link to the documentation.
739
740REFERENCES_LINK_SOURCE = YES
741
742# If the USE_HTAGS tag is set to YES then the references to source code
743# will point to the HTML generated by the htags(1) tool instead of doxygen
744# built-in source browser. The htags tool is part of GNU's global source
745# tagging system (see http://www.gnu.org/software/global/global.html). You
746# will need version 4.8.6 or higher.
747
748USE_HTAGS              = NO
749
750# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
751# will generate a verbatim copy of the header file for each class for
752# which an include is specified. Set to NO to disable this.
753
754VERBATIM_HEADERS       = YES
755
756#---------------------------------------------------------------------------
757# configuration options related to the alphabetical class index
758#---------------------------------------------------------------------------
759
760# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
761# of all compounds will be generated. Enable this if the project
762# contains a lot of classes, structs, unions or interfaces.
763
764ALPHABETICAL_INDEX     = YES
765
766# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
767# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
768# in which this list will be split (can be a number in the range [1..20])
769
770COLS_IN_ALPHA_INDEX    = 5
771
772# In case all classes in a project start with a common prefix, all
773# classes will be put under the same header in the alphabetical index.
774# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
775# should be ignored while generating the index headers.
776
777IGNORE_PREFIX          =
778
779#---------------------------------------------------------------------------
780# configuration options related to the HTML output
781#---------------------------------------------------------------------------
782
783# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
784# generate HTML output.
785
786GENERATE_HTML          = YES
787
788# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
789# If a relative path is entered the value of OUTPUT_DIRECTORY will be
790# put in front of it. If left blank `html' will be used as the default path.
791
792HTML_OUTPUT            = html
793
794# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
795# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
796# doxygen will generate files with .html extension.
797
798HTML_FILE_EXTENSION    = .html
799
800# The HTML_HEADER tag can be used to specify a personal HTML header for
801# each generated HTML page. If it is left blank doxygen will generate a
802# standard header.
803
804HTML_HEADER            =
805
806# The HTML_FOOTER tag can be used to specify a personal HTML footer for
807# each generated HTML page. If it is left blank doxygen will generate a
808# standard footer.
809
810HTML_FOOTER            =
811
812# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
813# style sheet that is used by each HTML page. It can be used to
814# fine-tune the look of the HTML output. If the tag is left blank doxygen
815# will generate a default style sheet. Note that doxygen will try to copy
816# the style sheet file to the HTML output directory, so don't put your own
817# stylesheet in the HTML output directory as well, or it will be erased!
818
819HTML_STYLESHEET        =
820
821# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
822# page will contain the date and time when the page was generated. Setting
823# this to NO can help when comparing the output of multiple runs.
824
825HTML_TIMESTAMP         = YES
826
827# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
828# files or namespaces will be aligned in HTML using tables. If set to
829# NO a bullet list will be used.
830
831HTML_ALIGN_MEMBERS     = YES
832
833# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
834# documentation will contain sections that can be hidden and shown after the
835# page has loaded. For this to work a browser that supports
836# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
837# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
838
839HTML_DYNAMIC_SECTIONS  = YES
840
841# If the GENERATE_DOCSET tag is set to YES, additional index files
842# will be generated that can be used as input for Apple's Xcode 3
843# integrated development environment, introduced with OSX 10.5 (Leopard).
844# To create a documentation set, doxygen will generate a Makefile in the
845# HTML output directory. Running make will produce the docset in that
846# directory and running "make install" will install the docset in
847# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
848# it at startup.
849# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
850
851GENERATE_DOCSET        = NO
852
853# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
854# feed. A documentation feed provides an umbrella under which multiple
855# documentation sets from a single provider (such as a company or product suite)
856# can be grouped.
857
858DOCSET_FEEDNAME        = "Doxygen generated docs"
859
860# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
861# should uniquely identify the documentation set bundle. This should be a
862# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
863# will append .docset to the name.
864
865DOCSET_BUNDLE_ID       = org.doxygen.Project
866
867# If the GENERATE_HTMLHELP tag is set to YES, additional index files
868# will be generated that can be used as input for tools like the
869# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
870# of the generated HTML documentation.
871
872GENERATE_HTMLHELP      = NO
873
874# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
875# be used to specify the file name of the resulting .chm file. You
876# can add a path in front of the file if the result should not be
877# written to the html output directory.
878
879CHM_FILE               =
880
881# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
882# be used to specify the location (absolute path including file name) of
883# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
884# the HTML help compiler on the generated index.hhp.
885
886HHC_LOCATION           =
887
888# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
889# controls if a separate .chi index file is generated (YES) or that
890# it should be included in the master .chm file (NO).
891
892GENERATE_CHI           = NO
893
894# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
895# is used to encode HtmlHelp index (hhk), content (hhc) and project file
896# content.
897
898CHM_INDEX_ENCODING     =
899
900# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
901# controls whether a binary table of contents is generated (YES) or a
902# normal table of contents (NO) in the .chm file.
903
904BINARY_TOC             = NO
905
906# The TOC_EXPAND flag can be set to YES to add extra items for group members
907# to the contents of the HTML help documentation and to the tree view.
908
909TOC_EXPAND             = NO
910
911# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
912# are set, an additional index file will be generated that can be used as input for
913# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
914# HTML documentation.
915
916GENERATE_QHP           = NO
917
918# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
919# be used to specify the file name of the resulting .qch file.
920# The path specified is relative to the HTML output folder.
921
922QCH_FILE               =
923
924# The QHP_NAMESPACE tag specifies the namespace to use when generating
925# Qt Help Project output. For more information please see
926# http://doc.trolltech.com/qthelpproject.html#namespace
927
928QHP_NAMESPACE          = org.doxygen.Project
929
930# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
931# Qt Help Project output. For more information please see
932# http://doc.trolltech.com/qthelpproject.html#virtual-folders
933
934QHP_VIRTUAL_FOLDER     = doc
935
936# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
937# For more information please see
938# http://doc.trolltech.com/qthelpproject.html#custom-filters
939
940QHP_CUST_FILTER_NAME   =
941
942# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
943# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
944
945QHP_CUST_FILTER_ATTRS  =
946
947# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
948# filter section matches.
949# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
950
951QHP_SECT_FILTER_ATTRS  =
952
953# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
954# be used to specify the location of Qt's qhelpgenerator.
955# If non-empty doxygen will try to run qhelpgenerator on the generated
956# .qhp file.
957
958QHG_LOCATION           =
959
960# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
961#  will be generated, which together with the HTML files, form an Eclipse help
962#  plugin. To install this plugin and make it available under the help contents
963# menu in Eclipse, the contents of the directory containing the HTML and XML
964# files needs to be copied into the plugins directory of eclipse. The name of
965# the directory within the plugins directory should be the same as
966# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears.
967
968GENERATE_ECLIPSEHELP   = NO
969
970# A unique identifier for the eclipse help plugin. When installing the plugin
971# the directory name containing the HTML and XML files should also have
972# this name.
973
974ECLIPSE_DOC_ID         = org.doxygen.Project
975
976# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
977# top of each HTML page. The value NO (the default) enables the index and
978# the value YES disables it.
979
980DISABLE_INDEX          = NO
981
982# This tag can be used to set the number of enum values (range [1..20])
983# that doxygen will group on one line in the generated HTML documentation.
984
985ENUM_VALUES_PER_LINE   = 4
986
987# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
988# structure should be generated to display hierarchical information.
989# If the tag value is set to YES, a side panel will be generated
990# containing a tree-like index structure (just like the one that
991# is generated for HTML Help). For this to work a browser that supports
992# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
993# Windows users are probably better off using the HTML help feature.
994
995GENERATE_TREEVIEW      = NONE
996
997# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
998# and Class Hierarchy pages using a tree view instead of an ordered list.
999
1000USE_INLINE_TREES       = NO
1001
1002# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1003# used to set the initial width (in pixels) of the frame in which the tree
1004# is shown.
1005
1006TREEVIEW_WIDTH         = 250
1007
1008# Use this tag to change the font size of Latex formulas included
1009# as images in the HTML documentation. The default is 10. Note that
1010# when you change the font size after a successful doxygen run you need
1011# to manually remove any form_*.png images from the HTML output directory
1012# to force them to be regenerated.
1013
1014FORMULA_FONTSIZE       = 11
1015
1016# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
1017# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should
1018# typically be disabled. For large projects the javascript based search engine
1019# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1020
1021SEARCHENGINE           = NO
1022
1023# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index
1024# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup
1025# and does not have live searching capabilities.
1026
1027SERVER_BASED_SEARCH    = NO
1028
1029#---------------------------------------------------------------------------
1030# configuration options related to the LaTeX output
1031#---------------------------------------------------------------------------
1032
1033# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1034# generate Latex output.
1035
1036GENERATE_LATEX         = NO
1037
1038# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1039# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1040# put in front of it. If left blank `latex' will be used as the default path.
1041
1042LATEX_OUTPUT           = latex
1043
1044# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1045# invoked. If left blank `latex' will be used as the default command name.
1046# Note that when enabling USE_PDFLATEX this option is only used for
1047# generating bitmaps for formulas in the HTML output, but not in the
1048# Makefile that is written to the output directory.
1049
1050LATEX_CMD_NAME         = latex
1051
1052# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1053# generate index for LaTeX. If left blank `makeindex' will be used as the
1054# default command name.
1055
1056MAKEINDEX_CMD_NAME     = makeindex
1057
1058# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1059# LaTeX documents. This may be useful for small projects and may help to
1060# save some trees in general.
1061
1062COMPACT_LATEX          = NO
1063
1064# The PAPER_TYPE tag can be used to set the paper type that is used
1065# by the printer. Possible values are: a4, a4wide, letter, legal and
1066# executive. If left blank a4wide will be used.
1067
1068PAPER_TYPE             = a4wide
1069
1070# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1071# packages that should be included in the LaTeX output.
1072
1073EXTRA_PACKAGES         =
1074
1075# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1076# the generated latex document. The header should contain everything until
1077# the first chapter. If it is left blank doxygen will generate a
1078# standard header. Notice: only use this tag if you know what you are doing!
1079
1080LATEX_HEADER           =
1081
1082# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1083# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1084# contain links (just like the HTML output) instead of page references
1085# This makes the output suitable for online browsing using a pdf viewer.
1086
1087PDF_HYPERLINKS         = YES
1088
1089# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1090# plain latex in the generated Makefile. Set this option to YES to get a
1091# higher quality PDF documentation.
1092
1093USE_PDFLATEX           = YES
1094
1095# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1096# command to the generated LaTeX files. This will instruct LaTeX to keep
1097# running if errors occur, instead of asking the user for help.
1098# This option is also used when generating formulas in HTML.
1099
1100LATEX_BATCHMODE        = NO
1101
1102# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1103# include the index chapters (such as File Index, Compound Index, etc.)
1104# in the output.
1105
1106LATEX_HIDE_INDICES     = NO
1107
1108# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
1109
1110LATEX_SOURCE_CODE      = NO
1111
1112#---------------------------------------------------------------------------
1113# configuration options related to the RTF output
1114#---------------------------------------------------------------------------
1115
1116# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1117# The RTF output is optimized for Word 97 and may not look very pretty with
1118# other RTF readers or editors.
1119
1120GENERATE_RTF           = NO
1121
1122# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1123# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1124# put in front of it. If left blank `rtf' will be used as the default path.
1125
1126RTF_OUTPUT             = rtf
1127
1128# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1129# RTF documents. This may be useful for small projects and may help to
1130# save some trees in general.
1131
1132COMPACT_RTF            = NO
1133
1134# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1135# will contain hyperlink fields. The RTF file will
1136# contain links (just like the HTML output) instead of page references.
1137# This makes the output suitable for online browsing using WORD or other
1138# programs which support those fields.
1139# Note: wordpad (write) and others do not support links.
1140
1141RTF_HYPERLINKS         = NO
1142
1143# Load stylesheet definitions from file. Syntax is similar to doxygen's
1144# config file, i.e. a series of assignments. You only have to provide
1145# replacements, missing definitions are set to their default value.
1146
1147RTF_STYLESHEET_FILE    =
1148
1149# Set optional variables used in the generation of an rtf document.
1150# Syntax is similar to doxygen's config file.
1151
1152RTF_EXTENSIONS_FILE    =
1153
1154#---------------------------------------------------------------------------
1155# configuration options related to the man page output
1156#---------------------------------------------------------------------------
1157
1158# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1159# generate man pages
1160
1161GENERATE_MAN           = NO
1162
1163# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1164# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1165# put in front of it. If left blank `man' will be used as the default path.
1166
1167MAN_OUTPUT             = man
1168
1169# The MAN_EXTENSION tag determines the extension that is added to
1170# the generated man pages (default is the subroutine's section .3)
1171
1172MAN_EXTENSION          = .3
1173
1174# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1175# then it will generate one additional man file for each entity
1176# documented in the real man page(s). These additional files
1177# only source the real man page, but without them the man command
1178# would be unable to find the correct page. The default is NO.
1179
1180MAN_LINKS              = NO
1181
1182#---------------------------------------------------------------------------
1183# configuration options related to the XML output
1184#---------------------------------------------------------------------------
1185
1186# If the GENERATE_XML tag is set to YES Doxygen will
1187# generate an XML file that captures the structure of
1188# the code including all documentation.
1189
1190GENERATE_XML           = NO
1191
1192# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1193# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1194# put in front of it. If left blank `xml' will be used as the default path.
1195
1196XML_OUTPUT             = xml
1197
1198# The XML_SCHEMA tag can be used to specify an XML schema,
1199# which can be used by a validating XML parser to check the
1200# syntax of the XML files.
1201
1202XML_SCHEMA             =
1203
1204# The XML_DTD tag can be used to specify an XML DTD,
1205# which can be used by a validating XML parser to check the
1206# syntax of the XML files.
1207
1208XML_DTD                =
1209
1210# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1211# dump the program listings (including syntax highlighting
1212# and cross-referencing information) to the XML output. Note that
1213# enabling this will significantly increase the size of the XML output.
1214
1215XML_PROGRAMLISTING     = YES
1216
1217#---------------------------------------------------------------------------
1218# configuration options for the AutoGen Definitions output
1219#---------------------------------------------------------------------------
1220
1221# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1222# generate an AutoGen Definitions (see autogen.sf.net) file
1223# that captures the structure of the code including all
1224# documentation. Note that this feature is still experimental
1225# and incomplete at the moment.
1226
1227GENERATE_AUTOGEN_DEF   = NO
1228
1229#---------------------------------------------------------------------------
1230# configuration options related to the Perl module output
1231#---------------------------------------------------------------------------
1232
1233# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1234# generate a Perl module file that captures the structure of
1235# the code including all documentation. Note that this
1236# feature is still experimental and incomplete at the
1237# moment.
1238
1239GENERATE_PERLMOD       = NO
1240
1241# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1242# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1243# to generate PDF and DVI output from the Perl module output.
1244
1245PERLMOD_LATEX          = NO
1246
1247# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1248# nicely formatted so it can be parsed by a human reader.
1249# This is useful
1250# if you want to understand what is going on.
1251# On the other hand, if this
1252# tag is set to NO the size of the Perl module output will be much smaller
1253# and Perl will parse it just the same.
1254
1255PERLMOD_PRETTY         = YES
1256
1257# The names of the make variables in the generated doxyrules.make file
1258# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1259# This is useful so different doxyrules.make files included by the same
1260# Makefile don't overwrite each other's variables.
1261
1262PERLMOD_MAKEVAR_PREFIX =
1263
1264#---------------------------------------------------------------------------
1265# Configuration options related to the preprocessor
1266#---------------------------------------------------------------------------
1267
1268# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1269# evaluate all C-preprocessor directives found in the sources and include
1270# files.
1271
1272ENABLE_PREPROCESSING   = YES
1273
1274# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1275# names in the source code. If set to NO (the default) only conditional
1276# compilation will be performed. Macro expansion can be done in a controlled
1277# way by setting EXPAND_ONLY_PREDEF to YES.
1278
1279MACRO_EXPANSION        = NO
1280
1281# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1282# then the macro expansion is limited to the macros specified with the
1283# PREDEFINED and EXPAND_AS_DEFINED tags.
1284
1285EXPAND_ONLY_PREDEF     = NO
1286
1287# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1288# in the INCLUDE_PATH (see below) will be search if a #include is found.
1289
1290SEARCH_INCLUDES        = YES
1291
1292# The INCLUDE_PATH tag can be used to specify one or more directories that
1293# contain include files that are not input files but should be processed by
1294# the preprocessor.
1295
1296INCLUDE_PATH           =
1297
1298# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1299# patterns (like *.h and *.hpp) to filter out the header-files in the
1300# directories. If left blank, the patterns specified with FILE_PATTERNS will
1301# be used.
1302
1303INCLUDE_FILE_PATTERNS  =
1304
1305# The PREDEFINED tag can be used to specify one or more macro names that
1306# are defined before the preprocessor is started (similar to the -D option of
1307# gcc). The argument of the tag is a list of macros of the form: name
1308# or name=definition (no spaces). If the definition and the = are
1309# omitted =1 is assumed. To prevent a macro definition from being
1310# undefined via #undef or recursively expanded use the := operator
1311# instead of the = operator.
1312
1313PREDEFINED             =
1314
1315# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1316# this tag can be used to specify a list of macro names that should be expanded.
1317# The macro definition that is found in the sources will be used.
1318# Use the PREDEFINED tag if you want to use a different macro definition.
1319
1320EXPAND_AS_DEFINED      =
1321
1322# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1323# doxygen's preprocessor will remove all function-like macros that are alone
1324# on a line, have an all uppercase name, and do not end with a semicolon. Such
1325# function macros are typically used for boiler-plate code, and will confuse
1326# the parser if not removed.
1327
1328SKIP_FUNCTION_MACROS   = YES
1329
1330#---------------------------------------------------------------------------
1331# Configuration::additions related to external references
1332#---------------------------------------------------------------------------
1333
1334# The TAGFILES option can be used to specify one or more tagfiles.
1335# Optionally an initial location of the external documentation
1336# can be added for each tagfile. The format of a tag file without
1337# this location is as follows:
1338#
1339# TAGFILES = file1 file2 ...
1340# Adding location for the tag files is done as follows:
1341#
1342# TAGFILES = file1=loc1 "file2 = loc2" ...
1343# where "loc1" and "loc2" can be relative or absolute paths or
1344# URLs. If a location is present for each tag, the installdox tool
1345# does not have to be run to correct the links.
1346# Note that each tag file must have a unique name
1347# (where the name does NOT include the path)
1348# If a tag file is not located in the directory in which doxygen
1349# is run, you must also specify the path to the tagfile here.
1350
1351TAGFILES               = ../../library/BDM.tag
1352
1353# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1354# a tag file that is based on the input files it reads.
1355
1356GENERATE_TAGFILE       = bdmtoolbox.tag
1357
1358# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1359# in the class index. If set to NO only the inherited external classes
1360# will be listed.
1361
1362ALLEXTERNALS           = NO
1363
1364# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1365# in the modules index. If set to NO, only the current project's groups will
1366# be listed.
1367
1368EXTERNAL_GROUPS        = YES
1369
1370# The PERL_PATH should be the absolute path and name of the perl script
1371# interpreter (i.e. the result of `which perl').
1372
1373PERL_PATH              = /usr/bin/perl
1374
1375#---------------------------------------------------------------------------
1376# Configuration options related to the dot tool
1377#---------------------------------------------------------------------------
1378
1379# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1380# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1381# or super classes. Setting the tag to NO turns the diagrams off. Note that
1382# this option is superseded by the HAVE_DOT option below. This is only a
1383# fallback. It is recommended to install and use dot, since it yields more
1384# powerful graphs.
1385
1386CLASS_DIAGRAMS         = YES
1387
1388# You can define message sequence charts within doxygen comments using the \msc
1389# command. Doxygen will then run the mscgen tool (see
1390# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1391# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1392# the mscgen tool resides. If left empty the tool is assumed to be found in the
1393# default search path.
1394
1395MSCGEN_PATH            =
1396
1397# If set to YES, the inheritance and collaboration graphs will hide
1398# inheritance and usage relations if the target is undocumented
1399# or is not a class.
1400
1401HIDE_UNDOC_RELATIONS   = YES
1402
1403# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1404# available from the path. This tool is part of Graphviz, a graph visualization
1405# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1406# have no effect if this option is set to NO (the default)
1407
1408HAVE_DOT               = YES
1409
1410# By default doxygen will write a font called FreeSans.ttf to the output
1411# directory and reference it in all dot files that doxygen generates. This
1412# font does not include all possible unicode characters however, so when you need
1413# these (or just want a differently looking font) you can specify the font name
1414# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1415# which can be done by putting it in a standard location or by setting the
1416# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1417# containing the font.
1418
1419DOT_FONTNAME           = FreeSans
1420
1421# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1422# The default size is 10pt.
1423
1424DOT_FONTSIZE           = 10
1425
1426# By default doxygen will tell dot to use the output directory to look for the
1427# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1428# different font using DOT_FONTNAME you can set the path where dot
1429# can find it using this tag.
1430
1431DOT_FONTPATH           =
1432
1433# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1434# will generate a graph for each documented class showing the direct and
1435# indirect inheritance relations. Setting this tag to YES will force the
1436# the CLASS_DIAGRAMS tag to NO.
1437
1438CLASS_GRAPH            = NO
1439
1440# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1441# will generate a graph for each documented class showing the direct and
1442# indirect implementation dependencies (inheritance, containment, and
1443# class references variables) of the class with other documented classes.
1444
1445COLLABORATION_GRAPH    = NO
1446
1447# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1448# will generate a graph for groups, showing the direct groups dependencies
1449
1450GROUP_GRAPHS           = NO
1451
1452# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1453# collaboration diagrams in a style similar to the OMG's Unified Modeling
1454# Language.
1455
1456UML_LOOK               = NO
1457
1458# If set to YES, the inheritance and collaboration graphs will show the
1459# relations between templates and their instances.
1460
1461TEMPLATE_RELATIONS     = NO
1462
1463# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1464# tags are set to YES then doxygen will generate a graph for each documented
1465# file showing the direct and indirect include dependencies of the file with
1466# other documented files.
1467
1468INCLUDE_GRAPH          = NO
1469
1470# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1471# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1472# documented header file showing the documented files that directly or
1473# indirectly include this file.
1474
1475INCLUDED_BY_GRAPH      = NO
1476
1477# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1478# doxygen will generate a call dependency graph for every global function
1479# or class method. Note that enabling this option will significantly increase
1480# the time of a run. So in most cases it will be better to enable call graphs
1481# for selected functions only using the \callgraph command.
1482
1483CALL_GRAPH             = NO
1484
1485# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1486# doxygen will generate a caller dependency graph for every global function
1487# or class method. Note that enabling this option will significantly increase
1488# the time of a run. So in most cases it will be better to enable caller
1489# graphs for selected functions only using the \callergraph command.
1490
1491CALLER_GRAPH           = NO
1492
1493# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1494# will graphical hierarchy of all classes instead of a textual one.
1495
1496GRAPHICAL_HIERARCHY    = YES
1497
1498# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1499# then doxygen will show the dependencies a directory has on other directories
1500# in a graphical way. The dependency relations are determined by the #include
1501# relations between the files in the directories.
1502
1503DIRECTORY_GRAPH        = YES
1504
1505# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1506# generated by dot. Possible values are png, jpg, or gif
1507# If left blank png will be used.
1508
1509DOT_IMAGE_FORMAT       = png
1510
1511# The tag DOT_PATH can be used to specify the path where the dot tool can be
1512# found. If left blank, it is assumed the dot tool can be found in the path.
1513
1514DOT_PATH               =
1515
1516# The DOTFILE_DIRS tag can be used to specify one or more directories that
1517# contain dot files that are included in the documentation (see the
1518# \dotfile command).
1519
1520DOTFILE_DIRS           =
1521
1522# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1523# nodes that will be shown in the graph. If the number of nodes in a graph
1524# becomes larger than this value, doxygen will truncate the graph, which is
1525# visualized by representing a node as a red box. Note that doxygen if the
1526# number of direct children of the root node in a graph is already larger than
1527# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1528# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1529
1530DOT_GRAPH_MAX_NODES    = 50
1531
1532# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1533# graphs generated by dot. A depth value of 3 means that only nodes reachable
1534# from the root by following a path via at most 3 edges will be shown. Nodes
1535# that lay further from the root node will be omitted. Note that setting this
1536# option to 1 or 2 may greatly reduce the computation time needed for large
1537# code bases. Also note that the size of a graph can be further restricted by
1538# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1539
1540MAX_DOT_GRAPH_DEPTH    = 1000
1541
1542# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1543# background. This is disabled by default, because dot on Windows does not
1544# seem to support this out of the box. Warning: Depending on the platform used,
1545# enabling this option may lead to badly anti-aliased labels on the edges of
1546# a graph (i.e. they become hard to read).
1547
1548DOT_TRANSPARENT        = NO
1549
1550# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1551# files in one run (i.e. multiple -o and -T options on the command line). This
1552# makes dot run faster, but since only newer versions of dot (>1.8.10)
1553# support this, this feature is disabled by default.
1554
1555DOT_MULTI_TARGETS      = NO
1556
1557# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1558# generate a legend page explaining the meaning of the various boxes and
1559# arrows in the dot generated graphs.
1560
1561GENERATE_LEGEND        = YES
1562
1563# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1564# remove the intermediate dot files that are used to generate
1565# the various graphs.
1566
1567DOT_CLEANUP            = NO
Note: See TracBrowser for help on using the browser.